Posted by John Concrane on April 26, 2020 in Business
Stone coatings producer: Originally created for use in bowling alleys, moisture-cure urethane is extremely tough and durable after it dries to a very high shine. It resists moisture, scratches, stains, and general wear. Its difficult application makes it less of an option for a do-it-yourselfer, though. Plus, the very high level of VOCs it releases can linger in the air for weeks, so all household members will need to relocate for as long as two weeks after application. As the name might suggest, moisture-cure urethane draws moisture from the air to cure, which means that it’s affected by the humidity on the day of application. If the air is very dry, the finish won’t cure or dry evenly. Too humid, and it can start to dry before it’s spread evenly across the floor. An even application of this fickle finish requires a quick hand and an experienced touch.
SILCOTE-AP is a coating that is hard, tough and has excellent abrasion, chemical, solvent and stain resistance properties. They provide outstanding UV and weather protection and can be used in continuously submerged applications. SILCOTE-AP coatings retain their color and gloss far better than practically any other topcoat in the protective coating industry, including the best of breed epoxies and polyurethanes. It provides a durable and decorative _finish for a variety of _flooring and countertop surfaces in residential, commercial, recreational, automotive, marine and aircraft applications.
Liquiguard Technologies has the best metal coating solutions designed to protect, maintain and extend the lifespan of a wide range of metals including aluminum, brass, bronze, chrome, pewter, cast iron, silver, stainless steel, etc. This unique line of eco-friendly, biodegradable coatings offer solutions to prevent tarnishing, oxidization, flash rust and corrosion, by repelling moisture, too. These water-based coatings are safe and easy to apply without releasing any toxins or fumes. And will maintain the look and feel of your metals without damaging the surfaces. Find additional details at Metal protective coating.
What type of surface preparation is needed for the area in question?Surface preparation is the most important step in the installation process and is critical to long-term performance of the total system. Unfortunately, there is no one “best way” to prepare the surface. The coating selection (thin film or thick) will have a bearing on the type of preparation. Or, to put it another way, the required surface prep can dictate the type of system from a thickness standpoint. A thinfilm coating will require preparation that will not leave a heavy profile. A heavy profile may require a leveling or fill coat before the thin film installation. This could double the estimated material cost. It is also important to remember that new concrete requires proper preparation just as does any old surface. Curing compounds must be removed, a proper profile or roughness achieved, and any surface laitance removed.
Our research strives to develop solutions that protect and enhance the appearance and durability of everyday objects and surfaces around the home and business. As well as encourage safety by creating products that will prevent slip and fall accidents, the second greatest cause of accidents in the U.S. Not only are we committed to developing healthy household and industrial products, but we ensure that our coatings are top-of-the-line; supported by a high degree of research for the latest and best raw materials that are both durable, yet cost effective. Find additional info at https://www.liquiguard.com/.